Ok Fini

TP_03/Pipfile

@@ -6,6 +6,9 @@ name = "pypi"
 [packages]
 jinja2 = "*"
 nornir = "*"
+nornir-utils = "*"
+nornir-napalm = "*"
+nornir-netmiko = "*"
 
 [dev-packages]
 

TP_03/config/R1_CPE_LYON_BAT_A_OSPF.conf

@@ -0,0 +1,10 @@
+router ospf 1
+ router-id 1.1.1.1
+
+ network 172.16.10.0 0.0.0.255 area 0
+
+ network 172.16.20.0 0.0.0.255 area 0
+
+ network 172.16.100.0 0.0.0.63 area 0
+
+end

TP_03/config/R1_CPE_LYON_BAT_A_VRRP.conf

@@ -0,0 +1,10 @@
+
+
+
+interface g2/0.10
+    vrrp 10 ip 172.16.10.252
+    vrrp 10  priority 100
+
+interface g2/0.20
+    vrrp 20 ip 172.16.20.252
+    vrrp 20  priority 100

TP_03/config/R1_CPE_LYON_BAT_B.conf

@@ -1,10 +1,7 @@
 
 interface g3/0
-    encapsulation dot1Q 
-    description "**NO DESCRIPTION**"
-    ip address  
+    no shutdown
     exit
-
 interface g3/0.10
     encapsulation dot1Q 10
     description "Gateway for teacher vlan"

TP_03/config/R1_CPE_LYON_BAT_B_OSPF.conf

@@ -0,0 +1,10 @@
+router ospf 1
+ router-id 4.4.4.4
+
+ network 172.16.30.0 0.0.0.255 area 0
+
+ network 172.16.40.0 0.0.0.255 area 0
+
+ network 172.16.100.64 0.0.0.63 area 0
+
+end

TP_03/config/R1_CPE_LYON_BAT_B_VRRP.conf

@@ -0,0 +1,10 @@
+
+
+
+interface g3/0.10
+    vrrp 10 ip 172.16.30.252
+    vrrp 10  priority 100
+
+interface g3/0.20
+    vrrp 20 ip 172.16.40.252
+    vrrp 20  priority 100

TP_03/config/R1_VRRP_CPE_LYON_BAT_A.conf

@@ -0,0 +1,10 @@
+
+
+
+interface g2/0.10
+    vrrp 10 ip 172.16.10.252
+    vrrp 10  priority 100
+
+interface g2/0.20
+    vrrp 20 ip 172.16.20.252
+    vrrp 20  priority 100

TP_03/config/R1_VRRP_CPE_LYON_BAT_B.conf

@@ -0,0 +1,10 @@
+
+
+
+interface g3/0.10
+    vrrp 10 ip 172.16.30.252
+    vrrp 10  priority 100
+
+interface g3/0.20
+    vrrp 20 ip 172.16.40.252
+    vrrp 20  priority 100

TP_03/config/R2_CPE_LYON_BAT_A_OSPF.conf

@@ -0,0 +1,10 @@
+router ospf 1
+ router-id 2.2.2.2
+
+ network 172.16.10.0 0.0.0.255 area 0
+
+ network 172.16.20.0 0.0.0.255 area 0
+
+ network 172.16.100.0 0.0.0.63 area 0
+
+end

TP_03/config/R2_CPE_LYON_BAT_A_VRRP.conf

@@ -0,0 +1,14 @@
+
+
+
+interface g2/0.10
+    vrrp 10 ip 172.16.10.252
+    vrrp 10  priority 110
+    vrrp 10 preempt
+    exit
+
+interface g2/0.20
+    vrrp 20 ip 172.16.20.252
+    vrrp 20  priority 110
+    vrrp 20 preempt
+    exit

TP_03/config/R2_CPE_LYON_BAT_B.conf

@@ -1,10 +1,7 @@
 
 interface g3/0
-    encapsulation dot1Q 
-    description "**NO DESCRIPTION**"
-    ip address  
+    no shutdown
     exit
-
 interface g3/0.10
     encapsulation dot1Q 10
     description "Gateway for teacher vlan"

TP_03/config/R2_CPE_LYON_BAT_B_OSPF.conf

@@ -0,0 +1,10 @@
+router ospf 1
+ router-id 3.3.3.3
+
+ network 172.16.30.0 0.0.0.255 area 0
+
+ network 172.16.40.0 0.0.0.255 area 0
+
+ network 172.16.100.64 0.0.0.63 area 0
+
+end

TP_03/config/R2_CPE_LYON_BAT_B_VRRP.conf

@@ -0,0 +1,14 @@
+
+
+
+interface g3/0.10
+    vrrp 10 ip 172.16.30.252
+    vrrp 10  priority 110
+    vrrp 10 preempt
+    exit
+
+interface g3/0.20
+    vrrp 20 ip 172.16.40.252
+    vrrp 20  priority 110
+    vrrp 20 preempt
+    exit

TP_03/data/R1_CPE_LYON_BAT_A_OSPF.json

@@ -0,0 +1,8 @@
+{
+  "id_router": "1.1.1.1",
+  "networks": [
+    "172.16.10.0 0.0.0.255",
+    "172.16.20.0 0.0.0.255",
+    "172.16.100.0 0.0.0.63"
+  ]
+}

TP_03/data/R1_CPE_LYON_BAT_B_OSPF.json

@@ -0,0 +1,8 @@
+{
+  "id_router": "4.4.4.4",
+  "networks": [
+    "172.16.30.0 0.0.0.255",
+    "172.16.40.0 0.0.0.255",
+    "172.16.100.64 0.0.0.63"
+  ]
+}

TP_03/data/R2_CPE_LYON_BAT_A_OSPF.json

@@ -0,0 +1,8 @@
+{
+  "id_router": "2.2.2.2",
+  "networks": [
+    "172.16.10.0 0.0.0.255",
+    "172.16.20.0 0.0.0.255",
+    "172.16.100.0 0.0.0.63"
+  ]
+}

TP_03/data/R2_CPE_LYON_BAT_B_OSPF.json

@@ -0,0 +1,8 @@
+{
+  "id_router": "3.3.3.3",
+  "networks": [
+    "172.16.30.0 0.0.0.255",
+    "172.16.40.0 0.0.0.255",
+    "172.16.100.64 0.0.0.63"
+  ]
+}

TP_03/inventory/hosts.yaml

@@ -9,6 +9,7 @@ R1-CPE-BAT-A:
     device_model: C7200
     locality: lyon
     building: A
+    room: 001
 
 R2-CPE-BAT-A:
   hostname: 172.16.100.126

TP_03/scripts/create_config.py

@@ -28,10 +28,22 @@ def create_config_cpe_lyon_batA():
     R1_LYON_BAT_A_data = load_json_data_from_file(file_path='data/R1_CPE_LYON_BAT_A.json')
     R1_LYON_BAT_A_config = render_network_config(template_name='vlan_router.j2', data=R1_LYON_BAT_A_data)
 
+    R2_LYON_BAT_A_config_vrrp = render_network_config(template_name='vrrp_router.j2', data=R2_LYON_BAT_A_data)
+    R1_LYON_BAT_A_config_vrrp = render_network_config(template_name='vrrp_router.j2', data=R1_LYON_BAT_A_data)
+        
+    R2_LYON_BAT_A_config_ospf_data = load_json_data_from_file(file_path='data/R2_CPE_LYON_BAT_A_OSPF.json')
+    R2_LYON_BAT_A_config_ospf = render_network_config(template_name='config_ospf.j2', data=R2_LYON_BAT_A_config_ospf_data)
+    R1_LYON_BAT_A_config_ospf_data = load_json_data_from_file(file_path='data/R1_CPE_LYON_BAT_A_OSPF.json')
+    R1_LYON_BAT_A_config_ospf = render_network_config(template_name='config_ospf.j2', data=R1_LYON_BAT_A_config_ospf_data)
+
     return {
         'esw1': ESW1_CPE_LYON_BAT_A_config,
         'r1': R1_LYON_BAT_A_config,
-        'r2': R2_LYON_BAT_A_config
+        'r2': R2_LYON_BAT_A_config,
+        'r1_vrrp' : R1_LYON_BAT_A_config_vrrp,
+        'r2_vrrp' : R2_LYON_BAT_A_config_vrrp,
+        'r1_ospf' : R1_LYON_BAT_A_config_ospf,
+        'r2_ospf' : R2_LYON_BAT_A_config_ospf   
     }
 
 def create_config_cpe_lyon_batB():
@@ -44,10 +56,22 @@ def create_config_cpe_lyon_batB():
     R1_LYON_BAT_B_data = load_json_data_from_file(file_path='data/R1_CPE_LYON_BAT_B.json')
     R1_LYON_BAT_B_config = render_network_config(template_name='vlan_router.j2', data=R1_LYON_BAT_B_data)
 
+    R2_LYON_BAT_B_config_vrrp = render_network_config(template_name='vrrp_router.j2', data=R2_LYON_BAT_B_data)
+    R1_LYON_BAT_B_config_vrrp = render_network_config(template_name='vrrp_router.j2', data=R1_LYON_BAT_B_data)
+
+    R2_LYON_BAT_B_config_ospf_data = load_json_data_from_file(file_path='data/R2_CPE_LYON_BAT_B_OSPF.json')
+    R2_LYON_BAT_B_config_ospf = render_network_config(template_name='config_ospf.j2', data=R2_LYON_BAT_B_config_ospf_data)
+    R1_LYON_BAT_B_config_ospf_data = load_json_data_from_file(file_path='data/R1_CPE_LYON_BAT_B_OSPF.json')
+    R1_LYON_BAT_B_config_ospf = render_network_config(template_name='config_ospf.j2', data=R1_LYON_BAT_B_config_ospf_data)
+
     return {
         'esw1': ESW1_CPE_LYON_BAT_B_config,
         'r1': R1_LYON_BAT_B_config,
-        'r2': R2_LYON_BAT_B_config
+        'r2': R2_LYON_BAT_B_config,
+        'r1_vrrp' : R1_LYON_BAT_B_config_vrrp,
+        'r2_vrrp' : R2_LYON_BAT_B_config_vrrp,  
+        'r1_ospf' : R1_LYON_BAT_B_config_ospf,
+        'r2_ospf' : R2_LYON_BAT_B_config_ospf   
     }
     
 if __name__ == "__main__":
@@ -61,10 +85,18 @@ if __name__ == "__main__":
     save_built_config('config/R1_CPE_LYON_BAT_A.conf', config.get('r1'))
     save_built_config('config/R2_CPE_LYON_BAT_A.conf', config.get('r2'))
     save_built_config('config/ESW1_CPE_LYON_BAT_A.conf', config.get('esw1'))
+    save_built_config('config/R1_CPE_LYON_BAT_A_VRRP.conf', config.get('r1_vrrp'))
+    save_built_config('config/R2_CPE_LYON_BAT_A_VRRP.conf', config.get('r2_vrrp'))
+    save_built_config('config/R1_CPE_LYON_BAT_A_OSPF.conf', config.get('r1_ospf'))
+    save_built_config('config/R2_CPE_LYON_BAT_A_OSPF.conf', config.get('r2_ospf'))
 
     #question 5:
     config = create_config_cpe_lyon_batB()
     save_built_config('config/R1_CPE_LYON_BAT_B.conf', config.get('r1'))
     save_built_config('config/R2_CPE_LYON_BAT_B.conf', config.get('r2'))
     save_built_config('config/ESW1_CPE_LYON_BAT_B.conf', config.get('esw1'))
+    save_built_config('config/R1_CPE_LYON_BAT_B_VRRP.conf', config.get('r1_vrrp'))
+    save_built_config('config/R2_CPE_LYON_BAT_B_VRRP.conf', config.get('r2_vrrp'))
+    save_built_config('config/R1_CPE_LYON_BAT_B_OSPF.conf', config.get('r1_ospf'))
+    save_built_config('config/R2_CPE_LYON_BAT_B_OSPF.conf', config.get('r2_ospf'))
     

TP_03/scripts/run_nornir.py

@@ -1,46 +1,66 @@
 from nornir import InitNornir
+from nornir.core.task import Task, Result
+from nornir_utils.plugins.functions import print_result
+from nornir_napalm.plugins.tasks import napalm_get,napalm_configure, napalm_cli
+from nornir_netmiko.tasks import netmiko_send_config,netmiko_send_command, netmiko_save_config, netmiko_commit
 
 def question_13(nr):
-    pass
+    for key in nr.__dict__.keys():
+        print(f"  - {key}")
 
 def question_14(nr):
-    pass
+    print(nr.inventory.hosts)
+    print(type(nr.inventory.hosts))
 
 def question_15(nr):
-    pass
+    print(nr.inventory.hosts["R1-CPE-BAT-A"])
+    print(type(nr.inventory.hosts["R1-CPE-BAT-A"]))
 
 def question_16(nr):
-    pass
+    print(dir(nr.inventory.hosts["R1-CPE-BAT-A"]))
+    first_host = list(nr.inventory.hosts.values())[0]
+    print(f"Adresse IP (hostname): {first_host.hostname}")
+    print(f"Username: {first_host.username}")
+    print(f"Password: {first_host.password}")
 
 def question_17(nr):
-    pass
+    print(dir(nr.inventory.hosts["R1-CPE-BAT-A"]))
 
 def question_18(nr):
-    pass
+    print(nr.inventory.hosts["R1-CPE-BAT-A"].data["room"])
 
 def question_19(nr):
-    pass
+    print(nr.inventory.groups)
+
 
 def question_20(nr):
-    pass
+    print(nr.inventory.hosts.get('R1-CPE-BAT-A').groups)
 
 def question_21(nr):
-    pass
+    print(nr.inventory.hosts.get('R1-CPE-BAT-A').groups[0].keys())
 
 def question_22(nr):
-    pass
+    print(nr.inventory.hosts.get('R1-CPE-BAT-A').groups[0].get('vendor'))
 
 def question_23(nr):
-    pass
+    for host_name in nr.inventory.hosts:
+        print(nr.inventory.hosts.get(host_name).hostname)
 
 def question_24(nr):
-    pass
+    print(nr.filter(device_type='router').inventory.hosts.keys())
 
 def question_25(nr):
-    pass
+    print(nr.filter(device_type='router_switch').inventory.hosts.keys())
+
+def hello_world(task: Task) -> Result:
+    return Result(
+    host=task.host,
+    result=f"{task.host.name} says hello world!"
+    )
 
 def question_26(nr):
-    pass
+    result = nr.run(task=hello_world)
+    print(result)
 
 def question_27(nr):
     result = nr.run(task=hello_world)
@@ -51,31 +71,170 @@ def question_29(nr):
     print_result(result)
 
 def question_30(nr):
-    pass
+    host = nr.filter(device_type='router_switch')
+    print_result(host.run(task=hello_world))
 
+
+def display_interfaces(task):
+    task.run(
+        task=napalm_cli,
+        commands=["show ip interface brief"]
+    )
 def question_32(nr):
-    pass
+    filtre = nr.filter(device_type='router')
+    result = filtre.run(task=display_interfaces)
+    print_result(result)
+
+def get_arp_table(task):
+    task.run(
+        task=napalm_get,
+        getters=["arp_table"]
+    )
+
+def configure_loopback_r1(task):
+    task.run(
+        task=napalm_configure,
+        configuration="""
+interface Lo1
+ ip address 1.1.1.1 255.255.255.255
+ description Loopback pour R1-CPE-BAT-A
+"""
+    )
+
+def configure_loopback_r2(task):
+    task.run(
+        task=napalm_configure,
+        configuration="""
+interface Lo1
+ ip address 2.2.2.2 255.255.255.255
+ description Loopback pour R2-CPE-BAT-A
+"""
+    )
 
-def question_33(nr):
-    pass
 
 def question_34(nr):
-    pass
+    R1 = nr.filter(name='R1-CPE-BAT-A')
+    result_R1 = R1.run(task=configure_loopback_r1)
+    R2 = nr.filter(name='R2-CPE-BAT-A')
+    result_R2 = R2.run(task=configure_loopback_r2)
+    print_result(result_R1)
+    print_result(result_R2)
+
+def save_running_config(task):
+    # Exécute la commande de sauvegarde de la configuration
+    task.run(
+        task=napalm_cli,
+        commands=["wr"]
+    )
 
 def question_35(nr):
-    pass
+    result = nr.run(task=save_running_config)
+    print_result(result)
 
 def question_36(nr):
-    pass
+    filtre = nr.filter(device_type='router')
+    result = filtre.run(task=netmiko_send_command,command_string="show ip interface brief")
+    print_result(result)
+    
+def configure_loopback2_r1(task):
+    config_commands = [
+        "interface loopback 2",
+        "ip address 1.1.1.2 255.255.255.255",
+        "description Loopback2 pour R1-CPE-BAT-A"
+    ]
+    task.run(task=netmiko_send_config, config_commands=config_commands)
+
+def configure_loopback2_r2(task):
+    config_commands = [
+        "interface loopback 2",
+        "ip address 2.2.2.3 255.255.255.255",
+        "description Loopback2 pour R2-CPE-BAT-A"
+    ]
+    task.run(task=netmiko_send_config, config_commands=config_commands)
 
 def question_37(nr):
-    pass
+    result_r1 = nr.filter(name='R1-CPE-BAT-A').run(task=configure_loopback2_r1)
+    result_r2 = nr.filter(name='R2-CPE-BAT-A').run(task=configure_loopback2_r2)
+    print_result(result_r1)
+    print_result(result_r2)
+
+
 
 def question_38(nr):
-    pass
+    filtreR1 = nr.filter(name='R1-CPE-BAT-A')
+    resultR1 = filtreR1.run(task=netmiko_save_config)
+    filtreR2 = nr.filter(name='R2-CPE-BAT-A')
+    resultR2 = filtreR2.run(task=netmiko_save_config)
+    print_result(resultR1)
+    print_result(resultR2)
+
+def deploy_config_from_file(task: Task, config_file: str) -> Result:
+    """Déploie la configuration depuis un fichier sur un équipement via Nornir/Netmiko."""
+    with open(config_file, "r") as f:
+        commands = f.read().splitlines()
+    result = task.run(task=netmiko_send_config, config_commands=commands)
+    print_result(result)
+    result = task.run(task=netmiko_save_config)
+    print_result(result)
+    return result
+
+def deploy_vrrp(task):
+    vrrp_filename = task.host.name.replace("-", "_").replace("CPE", "CPE_LYON") + "_VRRP.conf"
+    task.run(
+        task=deploy_config_from_file,
+        config_file=f"config/{vrrp_filename}",
+        name=f"Déploiement VRRP {task.host.name}"
+    )
+
+def deploy_ospf(task):
+    vrrp_filename = task.host.name.replace("-", "_").replace("CPE", "CPE_LYON") + "_OSPF.conf"
+    task.run(
+        task=deploy_config_from_file,
+        config_file=f"config/{vrrp_filename}",
+        name=f"Déploiement VRRP {task.host.name}"
+    )
+
+
+def deploy_to_hosts(nr, host_patterns):
+    """Déploie les configurations pour tous les hôtes et ajoute le fichier VRRP pour les routers."""
+    
+    for pattern in host_patterns:
+        # Filtrer uniquement par nom pour tous
+        filtered_hosts = nr.filter(name=pattern)
+        if not filtered_hosts.inventory.hosts:
+            print(f"Aucun hôte correspondant à '{pattern}'")
+            continue
+
+        # Déploiement des configs principales
+        def deploy_main(task):
+            filename = task.host.name.replace("-", "_").replace("CPE", "CPE_LYON") + ".conf"
+            task.run(
+                task=deploy_config_from_file,
+                config_file=f"config/{filename}",
+                name=f"Déploiement config {task.host.name}"
+            )
+
+        filtered_hosts.run(task=deploy_main)
+
+    # Déploiement VRRP uniquement pour les routers
+    routers = nr.filter(device_type="router")
+    routers.run(task=deploy_vrrp)
+    routers.run(task=deploy_ospf)
+
+
+
 
 def question_39(nr):
-    pass
+    host_patterns = [
+        'R1-CPE-BAT-A',
+        'R2-CPE-BAT-A',
+        'R1-CPE-BAT-B',
+        'R2-CPE-BAT-B',
+        'ESW1-CPE-BAT-A',
+        'ESW1-CPE-BAT-BS'
+    
+    ]
+    deploy_to_hosts(nr, host_patterns)
 
 def question_39_d(nr):
     pass
@@ -101,7 +260,7 @@ if __name__ == "__main__":
     #question_24(nr)
     #question_25(nr)
     #question_26(nr)
-    question_27(nr)
+    #question_27(nr)
     #question_29(nr)
     #question_30(nr)
 
@@ -112,7 +271,7 @@ if __name__ == "__main__":
     #question_36(nr)
     #question_37(nr)
     #question_38(nr)
-    #question_39(nr)
+    question_39(nr)
     #question_39_d(nr)
 
     #question_40(nr)

TP_03/templates/config_ospf.j2

@@ -0,0 +1,6 @@
+router ospf 1
+ router-id {{ id_router }}
+{% for network in networks %}
+ network {{ network }} area 0
+{% endfor %}
+end

TP_03/templates/vlan_router.j2

@@ -4,7 +4,7 @@ interface {{ interface.name }}
     no shutdown
     exit
     
-{%- elif "3/0" == interface.name %}
+{%- elif "g3/0" == interface.name %}
 interface {{ interface.name }}
     no shutdown
     exit

fastprod_backend/Pipfile

@@ -0,0 +1,18 @@
+[[source]]
+url = "https://pypi.org/simple"
+verify_ssl = true
+name = "pypi"
+
+[packages]
+flask = "*"
+nornir = "*"
+pyyaml = "*"
+nornir-napalm = "*"
+nornir-netmiko = "*"
+nornir-utils = "*"
+flask-cors = "*"
+
+[dev-packages]
+
+[requires]
+python_version = "3.12"

fastprod_backend/R1-CPE-BAT-A_2025-11-27 13:41:22.690142.conf

@@ -0,0 +1,168 @@
+!
+upgrade fpd auto
+version 12.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+!
+hostname R1-CPE-BAT-A
+!
+boot-start-marker
+boot-end-marker
+!
+logging message-counter syslog
+!
+no aaa new-model
+ip source-route
+no ip icmp rate-limit unreachable
+ip cef
+!
+!
+!
+!
+no ip domain lookup
+ip domain name r1.cpe.local
+no ipv6 cef
+!
+multilink bundle-name authenticated
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+file prompt quiet
+username cisco privilege 15 password 0 cisco
+archive
+ log config
+  hidekeys
+! 
+!
+!
+!
+!
+ip tcp synwait-time 5
+ip ssh version 2
+ip scp server enable
+!
+!
+!
+!
+interface Loopback1
+ description Loopback pour R1-CPE-BAT-A
+ ip address 1.1.1.1 255.255.255.255
+!
+interface Loopback2
+ description Loopback2 pour R1-CPE-BAT-A
+ ip address 1.1.1.2 255.255.255.255
+!
+interface Loopback10
+ description created from config file uploaded from postman
+ ip address 10.10.10.10 255.255.255.255
+!
+interface FastEthernet0/0
+ ip address 172.16.100.62 255.255.255.192
+ duplex half
+!
+interface Serial1/0
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/1
+ ip address 10.1.1.1 255.255.255.252
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/2
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/3
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface GigabitEthernet2/0
+ no ip address
+ negotiation auto
+!
+interface GigabitEthernet2/0.10
+ description "Gateway for teacher vlan"
+ encapsulation dot1Q 10
+ ip address 172.16.10.253 255.255.255.0
+ vrrp 10 ip 172.16.10.252
+!
+interface GigabitEthernet2/0.20
+ description "Gateway for student vlan"
+ encapsulation dot1Q 20
+ ip address 172.16.20.253 255.255.255.0
+ vrrp 20 ip 172.16.20.252
+!
+interface GigabitEthernet2/0.99
+ encapsulation dot1Q 99
+ ip address 172.16.100.125 255.255.255.192
+ vrrp 99 ip 172.16.100.124
+!
+router ospf 1
+ router-id 1.1.1.1
+ log-adjacency-changes
+ passive-interface FastEthernet0/0
+ passive-interface GigabitEthernet2/0.99
+ network 10.1.1.0 0.0.0.3 area 0
+ network 172.16.10.0 0.0.0.255 area 0
+ network 172.16.20.0 0.0.0.255 area 0
+ network 172.16.100.0 0.0.0.63 area 0
+ network 172.16.100.64 0.0.0.63 area 0
+!
+ip forward-protocol nd
+no ip http server
+no ip http secure-server
+!
+!
+!
+no cdp log mismatch duplex
+!
+!
+!
+!
+!
+!
+control-plane
+!
+!
+!
+!
+!
+!
+!
+gatekeeper
+ shutdown
+!
+!
+line con 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line aux 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line vty 0 4
+ login local
+ transport input ssh
+!
+end

fastprod_backend/fastprod/api.py

@@ -0,0 +1,146 @@
+from flask import Flask,jsonify,request,abort, make_response,send_file
+from werkzeug.exceptions import HTTPException
+from nornir import InitNornir
+from flask_cors import CORS
+
+import os
+from werkzeug.utils import secure_filename
+import json
+
+
+ALLOWED_EXTENSIONS = {'conf'}
+UPLOAD_FOLDER = 'fastprod/upload_files/'
+
+
+def init_nornir():
+    app.config['nr'] = InitNornir(config_file="fastprod/inventory/config.yaml")
+
+
+
+def allowed_file(filename):
+    return '.' in filename and \
+    filename.rsplit('.', 1)[1].lower() in ALLOWED_EXTENSIONS
+
+app = Flask(__name__)
+app.config['UPLOAD_FOLDER'] = UPLOAD_FOLDER
+CORS(app)
+
+
+from services.devices import ( get_inventory, add_device,get_device_by_name,delete_device,get_device_interfaces,get_device_interfaces_ip,get_device_technical_info)
+from services.config import (get_config_by_device,run_config_from_file_by_device)
+from services.tasks import (run_show_commands_by_device,run_config_commands_by_device)
+from services.snapshots import (get_snapshot_by_name,create_snapshot_by_device,get_snapshots_by_device)
+init_nornir()
+
+@app.route("/")
+def hello_world():
+    return jsonify({
+        "env": "DEV",
+        "name": "fastprod_backend",
+        "version": 1.0
+    })
+
+@app.route("/devices", methods=['GET', 'POST'])
+def devices():
+    if request.method == 'GET':
+        init_nornir()
+        devices = get_inventory()
+        return jsonify(devices=devices, total_count=len(devices))
+    if request.method == 'POST':
+        data = request.get_json()
+        new_device = add_device(data)
+        return jsonify(device=new_device)
+
+@app.route("/devices/<device_name>", methods=['GET', 'DELETE'])
+def device_by_name(device_name):
+    if request.method == 'GET':
+        device = get_device_by_name(device_name)
+        return jsonify(device=device)
+    if request.method == 'DELETE':
+        device = get_device_by_name(device_name)
+        delete_device(device)
+        return jsonify(message="Device deleted")
+
+
+@app.route("/devices/<device_name>/interfaces", methods=['GET'])
+def get_interfaces(device_name):
+    device = get_device_by_name(device_name)
+    interfaces = get_device_interfaces(device)
+    return jsonify(interfaces=interfaces)
+
+@app.route("/devices/<device_name>/interfaces/ip", methods=['GET'])
+def get_interfaces_ip(device_name):
+    if request.method == 'GET':
+        device = get_device_by_name(device_name)
+        interfaces_ip = get_device_interfaces_ip(device)
+        return jsonify(interfaces_ip=interfaces_ip)
+
+@app.route("/devices/<device_name>/facts", methods=['GET'])
+def get_technical_info(device_name):
+    if request.method == 'GET':
+        device = get_device_by_name(device_name)
+        technical_info = get_device_technical_info(device)
+        return jsonify(facts=technical_info)
+
+@app.route("/devices/<device_name>/config", methods=['GET','POST'])
+def get_config(device_name):
+    device = get_device_by_name(device_name)
+    if request.method == 'GET':
+        config = get_config_by_device(device)
+        return jsonify(interfaces_ip=config)
+    if request.method == 'POST':
+        if request.files.to_dict(flat=False).get('config_file'):
+            file = request.files['config_file']
+            if not allowed_file(file.filename):
+                abort(make_response(jsonify(message="file extension not allowed"), 403))
+            filename = secure_filename(file.filename)
+            file.save(os.path.join(app.config['UPLOAD_FOLDER'], filename))
+            result = run_config_from_file_by_device(device,file_path=os.path.join(app.config['UPLOAD_FOLDER'], filename))
+            return jsonify(result=result)
+        if request.get_json().get('mode') == 'enable':
+            commands = request.get_json().get('commands')
+            result = run_show_commands_by_device(device, commands=commands)
+            return jsonify(result=result)
+        if request.get_json().get('mode') == 'config':
+            commands = request.get_json().get('commands')
+            result = run_config_commands_by_device(device, commands=commands)
+            return jsonify(result=result, commands=commands)
+
+@app.route("/devices/<device_name>/snapshots", methods=['GET','POST'])
+def snapshot(device_name):
+    device = get_device_by_name(device_name)
+    print(device)
+    if request.method == 'GET':
+        data = get_snapshots_by_device(device)
+        return jsonify({
+            "result": True,
+            "snapshots": data
+        })
+    if request.method == 'POST':
+        snapshot_path = create_snapshot_by_device(device)
+        return jsonify({
+            "result": True,
+            "snapshots": snapshot_path
+        })
+
+@app.route("/snapshots/<path:filename>", methods=['GET'])
+def snapshot_by_name(filename):
+    if request.method == 'GET':
+        try:
+            return send_file('snapshots/'+filename)
+        except FileNotFoundError:
+            abort(make_response(jsonify(message="snapshot not found"), 404))
+
+@app.errorhandler(HTTPException)
+def handle_exception(e):
+    """Return JSON instead of HTML for HTTP errors."""
+    # start with the correct headers and status code from the error
+    response = e.get_response()
+    # replace the body with JSON
+    response.data = json.dumps({
+    "code": e.code,
+    "name": e.name,
+    "description": e.description,
+    })
+    response.content_type = "application/json"
+    return response

fastprod_backend/fastprod/inventory/config.yaml

@@ -0,0 +1,10 @@
+inventory:
+  plugin: SimpleInventory
+  options:
+    host_file: "fastprod/inventory/hosts.yaml"
+    group_file: "fastprod/inventory/groups.yaml"
+    defaults_file: "fastprod/inventory/defaults.yaml"
+runner:
+  plugin: threaded
+  options:
+    num_workers: 20 

fastprod_backend/fastprod/inventory/defaults.yaml

@@ -0,0 +1,2 @@
+username: cisco
+password: cisco

fastprod_backend/fastprod/inventory/groups.yaml

@@ -0,0 +1,4 @@
+ios:
+  platform: ios
+  data:
+    vendor: Cisco

fastprod_backend/fastprod/inventory/hosts.yaml

@@ -0,0 +1,67 @@
+ESW1-CPE-BAT-A:
+  data:
+    building: A
+    device_model: C3725
+    device_name: ESW1-CPE-BAT-A
+    device_type: router_switch
+    locality: lyon
+  groups:
+  - ios
+  hostname: 172.16.100.123
+  port: 22
+ESW1-CPE-BAT-B:
+  data:
+    building: B
+    device_model: C3725
+    device_name: ESW1-CPE-BAT-B
+    device_type: router_switch
+    locality: lyon
+  groups:
+  - ios
+  hostname: 172.16.100.187
+  port: 22
+R1-CPE-BAT-A:
+  data:
+    building: A
+    device_model: C7200
+    device_name: R1-CPE-BAT-A
+    device_type: router
+    locality: lyon
+    room: 1
+  groups:
+  - ios
+  hostname: 172.16.100.125
+  port: 22
+R1-CPE-BAT-B:
+  data:
+    building: B
+    device_model: C7200
+    device_name: R1-CPE-BAT-B
+    device_type: router
+    locality: lyon
+  groups:
+  - ios
+  hostname: 172.16.100.189
+  port: 22
+R2-CPE-BAT-A:
+  data:
+    building: A
+    device_model: C7200
+    device_name: R2-CPE-BAT-A
+    device_type: router
+    locality: lyon
+  groups:
+  - ios
+  hostname: 172.16.100.126
+  port: 22
+R2-CPE-BAT-B:
+  data:
+    building: B
+    device_model: C7200
+    device_name: R2-CPE-BAT-B
+    device_type: router
+    locality: lyon
+  groups:
+  - ios
+  hostname: 172.16.100.190
+  port: 22

fastprod_backend/fastprod/services/config.py

@@ -0,0 +1,19 @@
+from api import app
+from nornir_napalm.plugins.tasks import napalm_get, napalm_configure, napalm_cli
+from nornir.core.task import Task, Result
+from nornir_utils.plugins.functions import print_result
+from nornir_netmiko.tasks import netmiko_send_config, netmiko_send_command, netmiko_save_config,netmiko_commit
+
+
+def get_config_by_device(device):
+    nr = app.config.get('nr')
+    result = nr.filter(device_name=device.get('name')).run(task=napalm_get, getters=["get_config"])
+    return result[device.get('name')][0].result.get("get_config")
+
+
+def run_config_from_file_by_device(device=None, file_path=None):
+    nr = app.config.get('nr')
+    if device and file_path:
+        result = nr.filter(device_name=device.get('name')).run(task=netmiko_send_config,config_file=file_path)
+        print_result(result)
+        return result[device.get('name')].changed

fastprod_backend/fastprod/services/devices.py

@@ -0,0 +1,70 @@
+from api import app
+from flask import Flask,jsonify,request,abort, make_response
+from utils.inventory import *
+from nornir import InitNornir
+from nornir_utils.plugins.functions import print_result
+from nornir_napalm.plugins.tasks import napalm_get,napalm_configure, napalm_cli
+from nornir_netmiko.tasks import netmiko_send_config,netmiko_send_command, netmiko_save_config, netmiko_commit
+
+def get_inventory():
+    hosts = app.config.get('nr').inventory.dict().get('hosts').keys()
+    return list(map(lambda item: app.config.get('nr').inventory.dict().get('hosts').get(item), hosts))
+
+def add_device(device):
+    device = add_item_to_hosts_yaml(item=device)  
+    return device
+
+def get_device_by_name(name):
+    host = app.config.get('nr').inventory.hosts.get(name)
+    if not host:
+        abort(make_response(jsonify(message="device not found"), 404))
+    return host.dict()
+
+def delete_device(device):
+    try:
+        delete_item_from_hosts_yaml(item=device)
+    except Exception as e:
+        abort(make_response(jsonify(message="Unable to delete this device", error=str(e)), 500))
+
+def get_device_interfaces(device):
+    nr = app.config.get('nr')
+    result = nr.filter(device_name=device.get('name')).run(task=napalm_get,
+    getters=["get_interfaces"])
+    print_result(result)
+    print(result)
+    interfaces = result[device.get('name')][0].result.get('get_interfaces')
+    return list(map(lambda item: dict(name=item, **interfaces.get(item)), interfaces))
+
+def get_device_technical_info(device):
+    nr = app.config.get('nr')
+    result = nr.filter(device_name=device.get('name')).run(
+        task=napalm_get,
+        getters=["get_facts"]
+    )
+
+    print_result(result)
+
+    facts = result[device.get('name')][0].result.get('get_facts')
+
+    return {
+        "hostname": facts.get("hostname"),
+        "vendor": facts.get("vendor"),
+        "model": facts.get("model"),
+        "serial_number": facts.get("serial_number"),
+        "os_version": facts.get("os_version"),
+        "uptime": facts.get("uptime"),
+    }
+
+
+def get_device_interfaces_ip(device):
+    nr = app.config.get('nr')
+    result = nr.filter(device_name=device.get('name')).run(task=napalm_get,
+    getters=["get_interfaces_ip"])
+    print_result(result)
+    interfaces = result[device.get('name')][0].result.get('get_interfaces_ip')
+    def transformer(item):
+        ip_address = list(interfaces.get(item).get('ipv4').keys())[0]
+        prefix_length = interfaces.get(item).get('ipv4').get(list(interfaces.get(item).get('ipv4').keys())[0]).get('prefix_length')
+        return dict(name=item, ip=ip_address, prefix_length=prefix_length)
+    return list(map(lambda item: transformer(item), interfaces)) 
+    #return interfaces

fastprod_backend/fastprod/services/snapshots.py

@@ -0,0 +1,35 @@
+import os
+from datetime import datetime
+from api import app
+from services.config import get_config_by_device
+from flask import Flask,jsonify,request,abort, make_response
+snapshot_directory = 'fastprod/snapshots'
+
+
+def get_snapshot_by_name(name):
+    files = os.listdir()
+    snapshots = []
+    for file in files:
+        file_device_name = file.split('_')[0]
+        if name == file:
+            snapshots.append(dict(file=file, path=snapshot_directory, at=file.split('_')[1].split('.')[0]))
+    return snapshots
+def create_snapshot_by_device(device=None):
+    nr = app.config.get('nr')
+    config = get_config_by_device(device)
+
+    timestamp = datetime.now().strftime('%Y%m%d%H%M%S')
+
+    file_path = os.path.join(snapshot_directory, f"{device.get('name')}_{timestamp}.conf")
+    with open(file_path, 'w') as file:
+        file.write(config.get('running'))
+    return file_path
+
+def get_snapshots_by_device(device):
+    files = os.listdir(snapshot_directory)
+    snapshots = []
+    for file in files:
+        file_device_name = file.split('_')[0]
+        if file_device_name == device.get('name'):
+            snapshots.append(dict(file=file, path=snapshot_directory, at=file.split('_')[1].split('.')[0]))
+    return snapshots

fastprod_backend/fastprod/services/tasks.py

@@ -0,0 +1,35 @@
+from api import app
+from nornir_napalm.plugins.tasks import napalm_get, napalm_configure, napalm_cli
+from nornir.core.task import Task, Result
+from nornir_utils.plugins.functions import print_result
+from nornir_netmiko.tasks import netmiko_send_config, netmiko_send_command, netmiko_save_config,netmiko_commit
+
+def run_show_commands_by_device(device=None, commands=[]):
+    nr = app.config.get('nr')
+    commands_sent = []
+    if device:
+        if len(commands) > 1:
+            for command in commands:
+                result = nr.filter(device_name=device.get('name')).run(task=napalm_cli,
+                commands=[command])
+                print_result(result)
+                output = result[device.get('name')][0].result.get(command)
+                commands_sent.append(dict(command=command, result=output))
+                output = commands_sent
+        else:
+            result = nr.filter(device_name=device.get('name')).run(task=napalm_cli,
+            commands=commands)
+
+            output = result[device.get('name')][0].result.get(commands[0])
+            commands_sent.append(dict(command=commands[0], result= output))
+            output = commands_sent
+    return output
+
+def run_config_commands_by_device(device=None, commands=[]):
+    nr = app.config.get('nr')
+    commands_sent = []
+    if device:
+        result = nr.filter(device_name=device.get('name')).run(task=netmiko_send_config,
+        config_commands=[commands])
+        print_result(result)
+    return result[device.get('name')].changed

fastprod_backend/fastprod/snapshots/ESW1-CPE-BAT-A_20251127142806.conf

@@ -0,0 +1,236 @@
+!
+version 12.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+no service dhcp
+!
+hostname ESW1-CPE-BAT-A
+!
+boot-start-marker
+boot-end-marker
+!
+!
+no aaa new-model
+memory-size iomem 5
+no ip routing
+no ip icmp rate-limit unreachable
+no ip cef
+!
+!
+!
+!
+no ip domain lookup
+ip domain name esw1.local
+!
+multilink bundle-name authenticated
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+macro name add_vlan
+end
+vlan database
+vlan $v
+exit
+@
+macro name del_vlan
+end
+vlan database
+no vlan $v
+exit
+@
+!
+vtp file nvram:vlan.dat
+username cisco privilege 15 password 0 cisco
+archive
+ log config
+  hidekeys
+! 
+!
+!
+!
+ip tcp synwait-time 5
+ip ssh version 2
+!
+!
+!
+!
+interface Loopback1
+ no ip address
+!
+interface FastEthernet0/0
+ description *** Unused for Layer2 EtherSwitch ***
+ no ip address
+ no ip route-cache
+ duplex auto
+ speed auto
+!
+interface FastEthernet0/1
+ description *** Unused for Layer2 EtherSwitch ***
+ no ip address
+ no ip route-cache
+ shutdown
+ duplex auto
+ speed auto
+!
+interface FastEthernet1/0
+ switchport mode trunk
+ duplex full
+ speed 100
+!
+interface FastEthernet1/1
+ description "port vlan teacher"
+ switchport access vlan 10
+ duplex full
+ speed 100
+!
+interface FastEthernet1/2
+ description "port vlan student"
+ switchport access vlan 20
+ duplex full
+ speed 100
+!
+interface FastEthernet1/3
+ duplex full
+ speed 100
+!
+interface FastEthernet1/4
+ switchport mode trunk
+ duplex full
+ speed 100
+!
+interface FastEthernet1/5
+ duplex full
+ speed 100
+!
+interface FastEthernet1/6
+ duplex full
+ speed 100
+!
+interface FastEthernet1/7
+ duplex full
+ speed 100
+!
+interface FastEthernet1/8
+ duplex full
+ speed 100
+!
+interface FastEthernet1/9
+ duplex full
+ speed 100
+!
+interface FastEthernet1/10
+ duplex full
+ speed 100
+!
+interface FastEthernet1/11
+ duplex full
+ speed 100
+!
+interface FastEthernet1/12
+ duplex full
+ speed 100
+!
+interface FastEthernet1/13
+ duplex full
+ speed 100
+!
+interface FastEthernet1/14
+ switchport mode trunk
+ duplex full
+ speed 100
+!
+interface FastEthernet1/15
+ switchport mode trunk
+ duplex full
+ speed 100
+!
+interface FastEthernet2/0
+ no ip address
+ no ip route-cache
+ shutdown
+ duplex auto
+ speed auto
+!
+interface Vlan1
+ no ip address
+ no ip route-cache
+!
+interface Vlan99
+ ip address 172.16.100.123 255.255.255.192
+!
+ip forward-protocol nd
+!
+!
+no ip http server
+no ip http secure-server
+!
+no cdp log mismatch duplex
+!
+!
+!
+!
+!
+!
+control-plane
+!
+!
+!
+!
+!
+!
+!
+!
+!
+banner exec ^C
+
+***************************************************************
+This is a normal Router with a Switch module inside (NM-16ESW)
+It has been pre-configured with hard-coded speed and duplex
+
+To create vlans use the command "vlan database" in exec mode
+After creating all desired vlans use "exit" to apply the config
+
+To view existing vlans use the command "show vlan-switch brief"
+
+Alias(exec)     : vl   - "show vlan-switch brief" command
+Alias(configure): va X - macro to add vlan X
+Alias(configure): vd X - macro to delete vlan X
+***************************************************************
+
+^C
+alias configure va macro global trace add_vlan $v
+alias configure vd macro global trace del_vlan $v
+alias exec vl show vlan-switch brief
+!
+line con 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+line aux 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+line vty 0 4
+ login local
+ transport input ssh
+!
+!
+end

fastprod_backend/fastprod/snapshots/ESW1-CPE-BAT-A_20251127143602.conf

@@ -0,0 +1,236 @@
+!
+version 12.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+no service dhcp
+!
+hostname ESW1-CPE-BAT-A
+!
+boot-start-marker
+boot-end-marker
+!
+!
+no aaa new-model
+memory-size iomem 5
+no ip routing
+no ip icmp rate-limit unreachable
+no ip cef
+!
+!
+!
+!
+no ip domain lookup
+ip domain name esw1.local
+!
+multilink bundle-name authenticated
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+macro name add_vlan
+end
+vlan database
+vlan $v
+exit
+@
+macro name del_vlan
+end
+vlan database
+no vlan $v
+exit
+@
+!
+vtp file nvram:vlan.dat
+username cisco privilege 15 password 0 cisco
+archive
+ log config
+  hidekeys
+! 
+!
+!
+!
+ip tcp synwait-time 5
+ip ssh version 2
+!
+!
+!
+!
+interface Loopback1
+ no ip address
+!
+interface FastEthernet0/0
+ description *** Unused for Layer2 EtherSwitch ***
+ no ip address
+ no ip route-cache
+ duplex auto
+ speed auto
+!
+interface FastEthernet0/1
+ description *** Unused for Layer2 EtherSwitch ***
+ no ip address
+ no ip route-cache
+ shutdown
+ duplex auto
+ speed auto
+!
+interface FastEthernet1/0
+ switchport mode trunk
+ duplex full
+ speed 100
+!
+interface FastEthernet1/1
+ description "port vlan teacher"
+ switchport access vlan 10
+ duplex full
+ speed 100
+!
+interface FastEthernet1/2
+ description "port vlan student"
+ switchport access vlan 20
+ duplex full
+ speed 100
+!
+interface FastEthernet1/3
+ duplex full
+ speed 100
+!
+interface FastEthernet1/4
+ switchport mode trunk
+ duplex full
+ speed 100
+!
+interface FastEthernet1/5
+ duplex full
+ speed 100
+!
+interface FastEthernet1/6
+ duplex full
+ speed 100
+!
+interface FastEthernet1/7
+ duplex full
+ speed 100
+!
+interface FastEthernet1/8
+ duplex full
+ speed 100
+!
+interface FastEthernet1/9
+ duplex full
+ speed 100
+!
+interface FastEthernet1/10
+ duplex full
+ speed 100
+!
+interface FastEthernet1/11
+ duplex full
+ speed 100
+!
+interface FastEthernet1/12
+ duplex full
+ speed 100
+!
+interface FastEthernet1/13
+ duplex full
+ speed 100
+!
+interface FastEthernet1/14
+ switchport mode trunk
+ duplex full
+ speed 100
+!
+interface FastEthernet1/15
+ switchport mode trunk
+ duplex full
+ speed 100
+!
+interface FastEthernet2/0
+ no ip address
+ no ip route-cache
+ shutdown
+ duplex auto
+ speed auto
+!
+interface Vlan1
+ no ip address
+ no ip route-cache
+!
+interface Vlan99
+ ip address 172.16.100.123 255.255.255.192
+!
+ip forward-protocol nd
+!
+!
+no ip http server
+no ip http secure-server
+!
+no cdp log mismatch duplex
+!
+!
+!
+!
+!
+!
+control-plane
+!
+!
+!
+!
+!
+!
+!
+!
+!
+banner exec ^C
+
+***************************************************************
+This is a normal Router with a Switch module inside (NM-16ESW)
+It has been pre-configured with hard-coded speed and duplex
+
+To create vlans use the command "vlan database" in exec mode
+After creating all desired vlans use "exit" to apply the config
+
+To view existing vlans use the command "show vlan-switch brief"
+
+Alias(exec)     : vl   - "show vlan-switch brief" command
+Alias(configure): va X - macro to add vlan X
+Alias(configure): vd X - macro to delete vlan X
+***************************************************************
+
+^C
+alias configure va macro global trace add_vlan $v
+alias configure vd macro global trace del_vlan $v
+alias exec vl show vlan-switch brief
+!
+line con 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+line aux 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+line vty 0 4
+ login local
+ transport input ssh
+!
+!
+end

fastprod_backend/fastprod/snapshots/R1-CPE-BAT-A_20251127134858.conf

@@ -0,0 +1,168 @@
+!
+upgrade fpd auto
+version 12.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+!
+hostname R1-CPE-BAT-A
+!
+boot-start-marker
+boot-end-marker
+!
+logging message-counter syslog
+!
+no aaa new-model
+ip source-route
+no ip icmp rate-limit unreachable
+ip cef
+!
+!
+!
+!
+no ip domain lookup
+ip domain name r1.cpe.local
+no ipv6 cef
+!
+multilink bundle-name authenticated
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+file prompt quiet
+username cisco privilege 15 password 0 cisco
+archive
+ log config
+  hidekeys
+! 
+!
+!
+!
+!
+ip tcp synwait-time 5
+ip ssh version 2
+ip scp server enable
+!
+!
+!
+!
+interface Loopback1
+ description Loopback pour R1-CPE-BAT-A
+ ip address 1.1.1.1 255.255.255.255
+!
+interface Loopback2
+ description Loopback2 pour R1-CPE-BAT-A
+ ip address 1.1.1.2 255.255.255.255
+!
+interface Loopback10
+ description created from config file uploaded from postman
+ ip address 10.10.10.10 255.255.255.255
+!
+interface FastEthernet0/0
+ ip address 172.16.100.62 255.255.255.192
+ duplex half
+!
+interface Serial1/0
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/1
+ ip address 10.1.1.1 255.255.255.252
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/2
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/3
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface GigabitEthernet2/0
+ no ip address
+ negotiation auto
+!
+interface GigabitEthernet2/0.10
+ description "Gateway for teacher vlan"
+ encapsulation dot1Q 10
+ ip address 172.16.10.253 255.255.255.0
+ vrrp 10 ip 172.16.10.252
+!
+interface GigabitEthernet2/0.20
+ description "Gateway for student vlan"
+ encapsulation dot1Q 20
+ ip address 172.16.20.253 255.255.255.0
+ vrrp 20 ip 172.16.20.252
+!
+interface GigabitEthernet2/0.99
+ encapsulation dot1Q 99
+ ip address 172.16.100.125 255.255.255.192
+ vrrp 99 ip 172.16.100.124
+!
+router ospf 1
+ router-id 1.1.1.1
+ log-adjacency-changes
+ passive-interface FastEthernet0/0
+ passive-interface GigabitEthernet2/0.99
+ network 10.1.1.0 0.0.0.3 area 0
+ network 172.16.10.0 0.0.0.255 area 0
+ network 172.16.20.0 0.0.0.255 area 0
+ network 172.16.100.0 0.0.0.63 area 0
+ network 172.16.100.64 0.0.0.63 area 0
+!
+ip forward-protocol nd
+no ip http server
+no ip http secure-server
+!
+!
+!
+no cdp log mismatch duplex
+!
+!
+!
+!
+!
+!
+control-plane
+!
+!
+!
+!
+!
+!
+!
+gatekeeper
+ shutdown
+!
+!
+line con 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line aux 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line vty 0 4
+ login local
+ transport input ssh
+!
+end

fastprod_backend/fastprod/snapshots/R1-CPE-BAT-A_20251127135113.conf

@@ -0,0 +1,168 @@
+!
+upgrade fpd auto
+version 12.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+!
+hostname R1-CPE-BAT-A
+!
+boot-start-marker
+boot-end-marker
+!
+logging message-counter syslog
+!
+no aaa new-model
+ip source-route
+no ip icmp rate-limit unreachable
+ip cef
+!
+!
+!
+!
+no ip domain lookup
+ip domain name r1.cpe.local
+no ipv6 cef
+!
+multilink bundle-name authenticated
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+file prompt quiet
+username cisco privilege 15 password 0 cisco
+archive
+ log config
+  hidekeys
+! 
+!
+!
+!
+!
+ip tcp synwait-time 5
+ip ssh version 2
+ip scp server enable
+!
+!
+!
+!
+interface Loopback1
+ description Loopback pour R1-CPE-BAT-A
+ ip address 1.1.1.1 255.255.255.255
+!
+interface Loopback2
+ description Loopback2 pour R1-CPE-BAT-A
+ ip address 1.1.1.2 255.255.255.255
+!
+interface Loopback10
+ description created from config file uploaded from postman
+ ip address 10.10.10.10 255.255.255.255
+!
+interface FastEthernet0/0
+ ip address 172.16.100.62 255.255.255.192
+ duplex half
+!
+interface Serial1/0
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/1
+ ip address 10.1.1.1 255.255.255.252
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/2
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/3
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface GigabitEthernet2/0
+ no ip address
+ negotiation auto
+!
+interface GigabitEthernet2/0.10
+ description "Gateway for teacher vlan"
+ encapsulation dot1Q 10
+ ip address 172.16.10.253 255.255.255.0
+ vrrp 10 ip 172.16.10.252
+!
+interface GigabitEthernet2/0.20
+ description "Gateway for student vlan"
+ encapsulation dot1Q 20
+ ip address 172.16.20.253 255.255.255.0
+ vrrp 20 ip 172.16.20.252
+!
+interface GigabitEthernet2/0.99
+ encapsulation dot1Q 99
+ ip address 172.16.100.125 255.255.255.192
+ vrrp 99 ip 172.16.100.124
+!
+router ospf 1
+ router-id 1.1.1.1
+ log-adjacency-changes
+ passive-interface FastEthernet0/0
+ passive-interface GigabitEthernet2/0.99
+ network 10.1.1.0 0.0.0.3 area 0
+ network 172.16.10.0 0.0.0.255 area 0
+ network 172.16.20.0 0.0.0.255 area 0
+ network 172.16.100.0 0.0.0.63 area 0
+ network 172.16.100.64 0.0.0.63 area 0
+!
+ip forward-protocol nd
+no ip http server
+no ip http secure-server
+!
+!
+!
+no cdp log mismatch duplex
+!
+!
+!
+!
+!
+!
+control-plane
+!
+!
+!
+!
+!
+!
+!
+gatekeeper
+ shutdown
+!
+!
+line con 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line aux 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line vty 0 4
+ login local
+ transport input ssh
+!
+end

fastprod_backend/fastprod/snapshots/R1-CPE-BAT-A_20251127135221.conf

@@ -0,0 +1,168 @@
+!
+upgrade fpd auto
+version 12.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+!
+hostname R1-CPE-BAT-A
+!
+boot-start-marker
+boot-end-marker
+!
+logging message-counter syslog
+!
+no aaa new-model
+ip source-route
+no ip icmp rate-limit unreachable
+ip cef
+!
+!
+!
+!
+no ip domain lookup
+ip domain name r1.cpe.local
+no ipv6 cef
+!
+multilink bundle-name authenticated
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+file prompt quiet
+username cisco privilege 15 password 0 cisco
+archive
+ log config
+  hidekeys
+! 
+!
+!
+!
+!
+ip tcp synwait-time 5
+ip ssh version 2
+ip scp server enable
+!
+!
+!
+!
+interface Loopback1
+ description Loopback pour R1-CPE-BAT-A
+ ip address 1.1.1.1 255.255.255.255
+!
+interface Loopback2
+ description Loopback2 pour R1-CPE-BAT-A
+ ip address 1.1.1.2 255.255.255.255
+!
+interface Loopback10
+ description created from config file uploaded from postman
+ ip address 10.10.10.10 255.255.255.255
+!
+interface FastEthernet0/0
+ ip address 172.16.100.62 255.255.255.192
+ duplex half
+!
+interface Serial1/0
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/1
+ ip address 10.1.1.1 255.255.255.252
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/2
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/3
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface GigabitEthernet2/0
+ no ip address
+ negotiation auto
+!
+interface GigabitEthernet2/0.10
+ description "Gateway for teacher vlan"
+ encapsulation dot1Q 10
+ ip address 172.16.10.253 255.255.255.0
+ vrrp 10 ip 172.16.10.252
+!
+interface GigabitEthernet2/0.20
+ description "Gateway for student vlan"
+ encapsulation dot1Q 20
+ ip address 172.16.20.253 255.255.255.0
+ vrrp 20 ip 172.16.20.252
+!
+interface GigabitEthernet2/0.99
+ encapsulation dot1Q 99
+ ip address 172.16.100.125 255.255.255.192
+ vrrp 99 ip 172.16.100.124
+!
+router ospf 1
+ router-id 1.1.1.1
+ log-adjacency-changes
+ passive-interface FastEthernet0/0
+ passive-interface GigabitEthernet2/0.99
+ network 10.1.1.0 0.0.0.3 area 0
+ network 172.16.10.0 0.0.0.255 area 0
+ network 172.16.20.0 0.0.0.255 area 0
+ network 172.16.100.0 0.0.0.63 area 0
+ network 172.16.100.64 0.0.0.63 area 0
+!
+ip forward-protocol nd
+no ip http server
+no ip http secure-server
+!
+!
+!
+no cdp log mismatch duplex
+!
+!
+!
+!
+!
+!
+control-plane
+!
+!
+!
+!
+!
+!
+!
+gatekeeper
+ shutdown
+!
+!
+line con 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line aux 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line vty 0 4
+ login local
+ transport input ssh
+!
+end

fastprod_backend/fastprod/snapshots/R1-CPE-BAT-A_20251127135248.conf

@@ -0,0 +1,168 @@
+!
+upgrade fpd auto
+version 12.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+!
+hostname R1-CPE-BAT-A
+!
+boot-start-marker
+boot-end-marker
+!
+logging message-counter syslog
+!
+no aaa new-model
+ip source-route
+no ip icmp rate-limit unreachable
+ip cef
+!
+!
+!
+!
+no ip domain lookup
+ip domain name r1.cpe.local
+no ipv6 cef
+!
+multilink bundle-name authenticated
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+file prompt quiet
+username cisco privilege 15 password 0 cisco
+archive
+ log config
+  hidekeys
+! 
+!
+!
+!
+!
+ip tcp synwait-time 5
+ip ssh version 2
+ip scp server enable
+!
+!
+!
+!
+interface Loopback1
+ description Loopback pour R1-CPE-BAT-A
+ ip address 1.1.1.1 255.255.255.255
+!
+interface Loopback2
+ description Loopback2 pour R1-CPE-BAT-A
+ ip address 1.1.1.2 255.255.255.255
+!
+interface Loopback10
+ description created from config file uploaded from postman
+ ip address 10.10.10.10 255.255.255.255
+!
+interface FastEthernet0/0
+ ip address 172.16.100.62 255.255.255.192
+ duplex half
+!
+interface Serial1/0
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/1
+ ip address 10.1.1.1 255.255.255.252
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/2
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/3
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface GigabitEthernet2/0
+ no ip address
+ negotiation auto
+!
+interface GigabitEthernet2/0.10
+ description "Gateway for teacher vlan"
+ encapsulation dot1Q 10
+ ip address 172.16.10.253 255.255.255.0
+ vrrp 10 ip 172.16.10.252
+!
+interface GigabitEthernet2/0.20
+ description "Gateway for student vlan"
+ encapsulation dot1Q 20
+ ip address 172.16.20.253 255.255.255.0
+ vrrp 20 ip 172.16.20.252
+!
+interface GigabitEthernet2/0.99
+ encapsulation dot1Q 99
+ ip address 172.16.100.125 255.255.255.192
+ vrrp 99 ip 172.16.100.124
+!
+router ospf 1
+ router-id 1.1.1.1
+ log-adjacency-changes
+ passive-interface FastEthernet0/0
+ passive-interface GigabitEthernet2/0.99
+ network 10.1.1.0 0.0.0.3 area 0
+ network 172.16.10.0 0.0.0.255 area 0
+ network 172.16.20.0 0.0.0.255 area 0
+ network 172.16.100.0 0.0.0.63 area 0
+ network 172.16.100.64 0.0.0.63 area 0
+!
+ip forward-protocol nd
+no ip http server
+no ip http secure-server
+!
+!
+!
+no cdp log mismatch duplex
+!
+!
+!
+!
+!
+!
+control-plane
+!
+!
+!
+!
+!
+!
+!
+gatekeeper
+ shutdown
+!
+!
+line con 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line aux 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line vty 0 4
+ login local
+ transport input ssh
+!
+end

fastprod_backend/fastprod/snapshots/R1-CPE-BAT-A_20251127135309.conf

@@ -0,0 +1,168 @@
+!
+upgrade fpd auto
+version 12.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+!
+hostname R1-CPE-BAT-A
+!
+boot-start-marker
+boot-end-marker
+!
+logging message-counter syslog
+!
+no aaa new-model
+ip source-route
+no ip icmp rate-limit unreachable
+ip cef
+!
+!
+!
+!
+no ip domain lookup
+ip domain name r1.cpe.local
+no ipv6 cef
+!
+multilink bundle-name authenticated
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+file prompt quiet
+username cisco privilege 15 password 0 cisco
+archive
+ log config
+  hidekeys
+! 
+!
+!
+!
+!
+ip tcp synwait-time 5
+ip ssh version 2
+ip scp server enable
+!
+!
+!
+!
+interface Loopback1
+ description Loopback pour R1-CPE-BAT-A
+ ip address 1.1.1.1 255.255.255.255
+!
+interface Loopback2
+ description Loopback2 pour R1-CPE-BAT-A
+ ip address 1.1.1.2 255.255.255.255
+!
+interface Loopback10
+ description created from config file uploaded from postman
+ ip address 10.10.10.10 255.255.255.255
+!
+interface FastEthernet0/0
+ ip address 172.16.100.62 255.255.255.192
+ duplex half
+!
+interface Serial1/0
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/1
+ ip address 10.1.1.1 255.255.255.252
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/2
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/3
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface GigabitEthernet2/0
+ no ip address
+ negotiation auto
+!
+interface GigabitEthernet2/0.10
+ description "Gateway for teacher vlan"
+ encapsulation dot1Q 10
+ ip address 172.16.10.253 255.255.255.0
+ vrrp 10 ip 172.16.10.252
+!
+interface GigabitEthernet2/0.20
+ description "Gateway for student vlan"
+ encapsulation dot1Q 20
+ ip address 172.16.20.253 255.255.255.0
+ vrrp 20 ip 172.16.20.252
+!
+interface GigabitEthernet2/0.99
+ encapsulation dot1Q 99
+ ip address 172.16.100.125 255.255.255.192
+ vrrp 99 ip 172.16.100.124
+!
+router ospf 1
+ router-id 1.1.1.1
+ log-adjacency-changes
+ passive-interface FastEthernet0/0
+ passive-interface GigabitEthernet2/0.99
+ network 10.1.1.0 0.0.0.3 area 0
+ network 172.16.10.0 0.0.0.255 area 0
+ network 172.16.20.0 0.0.0.255 area 0
+ network 172.16.100.0 0.0.0.63 area 0
+ network 172.16.100.64 0.0.0.63 area 0
+!
+ip forward-protocol nd
+no ip http server
+no ip http secure-server
+!
+!
+!
+no cdp log mismatch duplex
+!
+!
+!
+!
+!
+!
+control-plane
+!
+!
+!
+!
+!
+!
+!
+gatekeeper
+ shutdown
+!
+!
+line con 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line aux 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line vty 0 4
+ login local
+ transport input ssh
+!
+end

fastprod_backend/fastprod/snapshots/R1-CPE-BAT-A_20251127135329.conf

@@ -0,0 +1,168 @@
+!
+upgrade fpd auto
+version 12.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+!
+hostname R1-CPE-BAT-A
+!
+boot-start-marker
+boot-end-marker
+!
+logging message-counter syslog
+!
+no aaa new-model
+ip source-route
+no ip icmp rate-limit unreachable
+ip cef
+!
+!
+!
+!
+no ip domain lookup
+ip domain name r1.cpe.local
+no ipv6 cef
+!
+multilink bundle-name authenticated
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+file prompt quiet
+username cisco privilege 15 password 0 cisco
+archive
+ log config
+  hidekeys
+! 
+!
+!
+!
+!
+ip tcp synwait-time 5
+ip ssh version 2
+ip scp server enable
+!
+!
+!
+!
+interface Loopback1
+ description Loopback pour R1-CPE-BAT-A
+ ip address 1.1.1.1 255.255.255.255
+!
+interface Loopback2
+ description Loopback2 pour R1-CPE-BAT-A
+ ip address 1.1.1.2 255.255.255.255
+!
+interface Loopback10
+ description created from config file uploaded from postman
+ ip address 10.10.10.10 255.255.255.255
+!
+interface FastEthernet0/0
+ ip address 172.16.100.62 255.255.255.192
+ duplex half
+!
+interface Serial1/0
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/1
+ ip address 10.1.1.1 255.255.255.252
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/2
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/3
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface GigabitEthernet2/0
+ no ip address
+ negotiation auto
+!
+interface GigabitEthernet2/0.10
+ description "Gateway for teacher vlan"
+ encapsulation dot1Q 10
+ ip address 172.16.10.253 255.255.255.0
+ vrrp 10 ip 172.16.10.252
+!
+interface GigabitEthernet2/0.20
+ description "Gateway for student vlan"
+ encapsulation dot1Q 20
+ ip address 172.16.20.253 255.255.255.0
+ vrrp 20 ip 172.16.20.252
+!
+interface GigabitEthernet2/0.99
+ encapsulation dot1Q 99
+ ip address 172.16.100.125 255.255.255.192
+ vrrp 99 ip 172.16.100.124
+!
+router ospf 1
+ router-id 1.1.1.1
+ log-adjacency-changes
+ passive-interface FastEthernet0/0
+ passive-interface GigabitEthernet2/0.99
+ network 10.1.1.0 0.0.0.3 area 0
+ network 172.16.10.0 0.0.0.255 area 0
+ network 172.16.20.0 0.0.0.255 area 0
+ network 172.16.100.0 0.0.0.63 area 0
+ network 172.16.100.64 0.0.0.63 area 0
+!
+ip forward-protocol nd
+no ip http server
+no ip http secure-server
+!
+!
+!
+no cdp log mismatch duplex
+!
+!
+!
+!
+!
+!
+control-plane
+!
+!
+!
+!
+!
+!
+!
+gatekeeper
+ shutdown
+!
+!
+line con 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line aux 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line vty 0 4
+ login local
+ transport input ssh
+!
+end

fastprod_backend/fastprod/snapshots/R1-CPE-BAT-A_20251127135524.conf

@@ -0,0 +1,168 @@
+!
+upgrade fpd auto
+version 12.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+!
+hostname R1-CPE-BAT-A
+!
+boot-start-marker
+boot-end-marker
+!
+logging message-counter syslog
+!
+no aaa new-model
+ip source-route
+no ip icmp rate-limit unreachable
+ip cef
+!
+!
+!
+!
+no ip domain lookup
+ip domain name r1.cpe.local
+no ipv6 cef
+!
+multilink bundle-name authenticated
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+file prompt quiet
+username cisco privilege 15 password 0 cisco
+archive
+ log config
+  hidekeys
+! 
+!
+!
+!
+!
+ip tcp synwait-time 5
+ip ssh version 2
+ip scp server enable
+!
+!
+!
+!
+interface Loopback1
+ description Loopback pour R1-CPE-BAT-A
+ ip address 1.1.1.1 255.255.255.255
+!
+interface Loopback2
+ description Loopback2 pour R1-CPE-BAT-A
+ ip address 1.1.1.2 255.255.255.255
+!
+interface Loopback10
+ description created from config file uploaded from postman
+ ip address 10.10.10.10 255.255.255.255
+!
+interface FastEthernet0/0
+ ip address 172.16.100.62 255.255.255.192
+ duplex half
+!
+interface Serial1/0
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/1
+ ip address 10.1.1.1 255.255.255.252
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/2
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/3
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface GigabitEthernet2/0
+ no ip address
+ negotiation auto
+!
+interface GigabitEthernet2/0.10
+ description "Gateway for teacher vlan"
+ encapsulation dot1Q 10
+ ip address 172.16.10.253 255.255.255.0
+ vrrp 10 ip 172.16.10.252
+!
+interface GigabitEthernet2/0.20
+ description "Gateway for student vlan"
+ encapsulation dot1Q 20
+ ip address 172.16.20.253 255.255.255.0
+ vrrp 20 ip 172.16.20.252
+!
+interface GigabitEthernet2/0.99
+ encapsulation dot1Q 99
+ ip address 172.16.100.125 255.255.255.192
+ vrrp 99 ip 172.16.100.124
+!
+router ospf 1
+ router-id 1.1.1.1
+ log-adjacency-changes
+ passive-interface FastEthernet0/0
+ passive-interface GigabitEthernet2/0.99
+ network 10.1.1.0 0.0.0.3 area 0
+ network 172.16.10.0 0.0.0.255 area 0
+ network 172.16.20.0 0.0.0.255 area 0
+ network 172.16.100.0 0.0.0.63 area 0
+ network 172.16.100.64 0.0.0.63 area 0
+!
+ip forward-protocol nd
+no ip http server
+no ip http secure-server
+!
+!
+!
+no cdp log mismatch duplex
+!
+!
+!
+!
+!
+!
+control-plane
+!
+!
+!
+!
+!
+!
+!
+gatekeeper
+ shutdown
+!
+!
+line con 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line aux 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line vty 0 4
+ login local
+ transport input ssh
+!
+end

fastprod_backend/fastprod/snapshots/R1-CPE-BAT-A_20251127144037.conf

@@ -0,0 +1,168 @@
+!
+upgrade fpd auto
+version 12.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+!
+hostname R1-CPE-BAT-A
+!
+boot-start-marker
+boot-end-marker
+!
+logging message-counter syslog
+!
+no aaa new-model
+ip source-route
+no ip icmp rate-limit unreachable
+ip cef
+!
+!
+!
+!
+no ip domain lookup
+ip domain name r1.cpe.local
+no ipv6 cef
+!
+multilink bundle-name authenticated
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+file prompt quiet
+username cisco privilege 15 password 0 cisco
+archive
+ log config
+  hidekeys
+! 
+!
+!
+!
+!
+ip tcp synwait-time 5
+ip ssh version 2
+ip scp server enable
+!
+!
+!
+!
+interface Loopback1
+ description Loopback pour R1-CPE-BAT-A
+ ip address 1.1.1.1 255.255.255.255
+!
+interface Loopback2
+ description Loopback2 pour R1-CPE-BAT-A
+ ip address 1.1.1.2 255.255.255.255
+!
+interface Loopback10
+ description created from config file uploaded from postman
+ ip address 10.10.10.10 255.255.255.255
+!
+interface FastEthernet0/0
+ ip address 172.16.100.62 255.255.255.192
+ duplex half
+!
+interface Serial1/0
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/1
+ ip address 10.1.1.1 255.255.255.252
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/2
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface Serial1/3
+ no ip address
+ shutdown
+ serial restart-delay 0
+!
+interface GigabitEthernet2/0
+ no ip address
+ negotiation auto
+!
+interface GigabitEthernet2/0.10
+ description "Gateway for teacher vlan"
+ encapsulation dot1Q 10
+ ip address 172.16.10.253 255.255.255.0
+ vrrp 10 ip 172.16.10.252
+!
+interface GigabitEthernet2/0.20
+ description "Gateway for student vlan"
+ encapsulation dot1Q 20
+ ip address 172.16.20.253 255.255.255.0
+ vrrp 20 ip 172.16.20.252
+!
+interface GigabitEthernet2/0.99
+ encapsulation dot1Q 99
+ ip address 172.16.100.125 255.255.255.192
+ vrrp 99 ip 172.16.100.124
+!
+router ospf 1
+ router-id 1.1.1.1
+ log-adjacency-changes
+ passive-interface FastEthernet0/0
+ passive-interface GigabitEthernet2/0.99
+ network 10.1.1.0 0.0.0.3 area 0
+ network 172.16.10.0 0.0.0.255 area 0
+ network 172.16.20.0 0.0.0.255 area 0
+ network 172.16.100.0 0.0.0.63 area 0
+ network 172.16.100.64 0.0.0.63 area 0
+!
+ip forward-protocol nd
+no ip http server
+no ip http secure-server
+!
+!
+!
+no cdp log mismatch duplex
+!
+!
+!
+!
+!
+!
+control-plane
+!
+!
+!
+!
+!
+!
+!
+gatekeeper
+ shutdown
+!
+!
+line con 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line aux 0
+ exec-timeout 0 0
+ privilege level 15
+ logging synchronous
+ stopbits 1
+line vty 0 4
+ login local
+ transport input ssh
+!
+end

fastprod_backend/fastprod/upload_files/R1-CPE-BAT-A_loopback.conf

@@ -0,0 +1,3 @@
+interface loopback 10
+ip add 10.10.10.10 255.255.255.255
+description created from config file uploaded from postman

fastprod_backend/fastprod/utils/inventory.py

@@ -0,0 +1,28 @@
+import yaml
+
+def update_hosts_yaml(file_path="fastprod/inventory/hosts.yaml", items=None):
+    if items:
+        with open(file_path, 'w') as yaml_file:
+            yaml.safe_dump(items, yaml_file)
+        return True
+
+def add_item_to_hosts_yaml(file_path="fastprod/inventory/hosts.yaml", save=True, item=None):
+    with open(file_path, 'r') as yaml_file:
+        hosts = yaml.safe_load(yaml_file)
+    
+    new_hosts = hosts.copy()
+    new_hosts[item.get('data').get('device_name')] = item
+    
+    if save:
+        update_hosts_yaml(items=new_hosts)
+    
+    return new_hosts[item.get('data').get('device_name')]
+
+def delete_item_from_hosts_yaml(yaml_file_path="fastprod/inventory/hosts.yaml", save=True,item=None, ):
+    with open(yaml_file_path,'r') as yaml_file:
+        hosts = yaml.safe_load(yaml_file)
+        new_hosts = hosts.copy()
+        del new_hosts[item.get('data').get('device_name')]
+        if save:
+            update_hosts_yaml(items=new_hosts)
+        return True

fastprod_backend/nornir.log

@@ -0,0 +1,267 @@
+2025-11-27 10:29:07,377 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 10:30:31,532 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 10:32:16,142 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 10:33:00,527 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 10:42:31,649 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces_ip']} on 1 hosts
+2025-11-27 10:43:18,016 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces_ip']} on 1 hosts
+2025-11-27 10:44:05,459 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces_ip']} on 1 hosts
+2025-11-27 10:44:18,600 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces_ip']} on 1 hosts
+2025-11-27 10:47:29,054 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces_ip']} on 1 hosts
+2025-11-27 10:47:38,118 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces_ip']} on 1 hosts
+2025-11-27 10:49:17,515 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces_ip']} on 1 hosts
+2025-11-27 10:50:27,409 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces_ip']} on 1 hosts
+2025-11-27 10:55:14,616 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_facts']} on 1 hosts
+2025-11-27 10:55:35,609 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_facts']} on 1 hosts
+2025-11-27 11:03:38,869 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 11:11:30,181 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 11:12:43,941 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 11:12:47,660 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 11:12:58,676 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 11:13:05,327 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 11:13:07,216 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 11:13:17,120 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 11:17:14,064 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 11:17:51,306 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 11:18:37,859 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 11:18:53,937 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 11:23:38,281 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 11:29:27,867 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 11:29:31,935 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 11:34:46,926 -  nornir.core -     INFO -        run() - Running task 'napalm_cli' with args {'commands': ['show ip route']} on 1 hosts
+2025-11-27 11:35:32,732 -  nornir.core -     INFO -        run() - Running task 'napalm_cli' with args {'commands': ['show ip route']} on 1 hosts
+2025-11-27 11:40:04,424 -  nornir.core -     INFO -        run() - Running task 'napalm_cli' with args {'commands': ['show ip route']} on 1 hosts
+2025-11-27 11:40:04,522 -  nornir.core -     INFO -        run() - Running task 'napalm_cli' with args {'commands': ['show ip interfaces brief']} on 1 hosts
+2025-11-27 11:52:28,952 -  nornir.core -     INFO -        run() - Running task 'netmiko_send_config' with args {'config_commands': [['interface loopback 8', 'ip add 8.8.8.8 255.255.255.255', 'description created_from_postman']]} on 1 hosts
+2025-11-27 11:52:29,772 - nornir.core.task -    ERROR -      start() - Host 'R1-CPE-BAT-A': task 'netmiko_send_config' failed with traceback:
+Traceback (most recent call last):
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/nornir/core/task.py", line 98, in start
+    r = self.task(self, **self.params)
+        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/nornir_netmiko/tasks/netmiko_send_config.py", line 38, in netmiko_send_config
+    result = net_connect.send_config_set(config_commands=config_commands, **kwargs)
+             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 111, in wrapper_decorator
+    return_val = func(self, *args, **kwargs)
+                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 2294, in send_config_set
+    [True for cmd in config_commands_tmp if re.search(bypass_commands, cmd)]
+                                            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/usr/lib/python3.12/re/__init__.py", line 177, in search
+    return _compile(pattern, flags).search(string)
+           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+TypeError: expected string or bytes-like object, got 'list'
+
+2025-11-27 13:16:50,900 -  nornir.core -     INFO -        run() - Running task 'netmiko_send_config' with args {'config_file': 'fastprod/upload_files/R1-CPE-BAT-A_loopback.conf'} on 1 hosts
+2025-11-27 13:18:50,146 -  nornir.core -     INFO -        run() - Running task 'netmiko_send_config' with args {'config_file': 'fastprod/upload_files/R1-CPE-BAT-A_loopback.conf'} on 1 hosts
+2025-11-27 13:37:51,507 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 13:38:36,507 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 13:39:25,827 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 13:41:20,882 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 13:47:08,252 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 13:47:38,160 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 13:47:55,759 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 13:48:27,889 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 13:48:56,963 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 13:51:12,137 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 13:52:20,289 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 13:52:47,032 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 13:53:07,676 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 13:53:27,844 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 13:55:22,325 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 14:27:45,418 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 14:27:45,421 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_facts']} on 1 hosts
+2025-11-27 14:27:45,425 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces_ip']} on 1 hosts
+2025-11-27 14:27:58,534 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_facts']} on 1 hosts
+2025-11-27 14:28:03,171 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 14:28:26,673 -  nornir.core -     INFO -        run() - Running task 'napalm_cli' with args {'commands': ['show ip int br']} on 1 hosts
+2025-11-27 14:29:34,616 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_facts']} on 1 hosts
+2025-11-27 14:31:40,826 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_facts']} on 1 hosts
+2025-11-27 14:31:47,954 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_facts']} on 1 hosts
+2025-11-27 14:34:06,500 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_facts']} on 1 hosts
+2025-11-27 14:34:06,510 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 14:34:06,526 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces_ip']} on 1 hosts
+2025-11-27 14:34:09,203 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 14:34:19,454 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces_ip']} on 1 hosts
+2025-11-27 14:34:20,018 - nornir.core.task -    ERROR -      start() - Host 'ESW1-CPE-BAT-A': task 'napalm_get' failed with traceback:
+Traceback (most recent call last):
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/nornir/core/task.py", line 98, in start
+    r = self.task(self, **self.params)
+        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/nornir_napalm/plugins/tasks/napalm_get.py", line 44, in napalm_get
+    result[g] = method(**options)
+                ^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/napalm/ios/ios.py", line 1215, in get_interfaces
+    output = self._send_command(command)
+             ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/napalm/ios/ios.py", line 208, in _send_command
+    output = self.device.send_command(command)
+             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 111, in wrapper_decorator
+    return_val = func(self, *args, **kwargs)
+                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/utilities.py", line 667, in wrapper_decorator
+    return func(self, *args, **kwargs)
+           ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 1791, in send_command
+    new_data = self.command_echo_read(cmd=cmd, read_timeout=10)
+               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 1494, in command_echo_read
+    new_data = self.read_until_pattern(
+               ^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 755, in read_until_pattern
+    raise ReadTimeout(msg)
+netmiko.exceptions.ReadTimeout: 
+
+Pattern not detected: 'show\\ interfaces' in output.
+
+Things you might try to fix this:
+1. Adjust the regex pattern to better identify the terminating string. Note, in
+many situations the pattern is automatically based on the network device's prompt.
+2. Increase the read_timeout to a larger value.
+
+You can also look at the Netmiko session_log or debug log for more information.
+
+
+
+2025-11-27 14:34:20,648 - nornir.core.task -    ERROR -      start() - Host 'ESW1-CPE-BAT-A': task 'napalm_get' failed with traceback:
+Traceback (most recent call last):
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/nornir/core/task.py", line 98, in start
+    r = self.task(self, **self.params)
+        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/nornir_napalm/plugins/tasks/napalm_get.py", line 44, in napalm_get
+    result[g] = method(**options)
+                ^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/napalm/ios/ios.py", line 3676, in get_config
+    output = self._send_command(command)
+             ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/napalm/ios/ios.py", line 208, in _send_command
+    output = self.device.send_command(command)
+             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 111, in wrapper_decorator
+    return_val = func(self, *args, **kwargs)
+                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/utilities.py", line 667, in wrapper_decorator
+    return func(self, *args, **kwargs)
+           ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 1791, in send_command
+    new_data = self.command_echo_read(cmd=cmd, read_timeout=10)
+               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 1494, in command_echo_read
+    new_data = self.read_until_pattern(
+               ^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 755, in read_until_pattern
+    raise ReadTimeout(msg)
+netmiko.exceptions.ReadTimeout: 
+
+Pattern not detected: 'show\\ running\\-config' in output.
+
+Things you might try to fix this:
+1. Adjust the regex pattern to better identify the terminating string. Note, in
+many situations the pattern is automatically based on the network device's prompt.
+2. Increase the read_timeout to a larger value.
+
+You can also look at the Netmiko session_log or debug log for more information.
+
+
+
+2025-11-27 14:34:26,321 -  nornir.core -  WARNING -        run() - Task 'napalm_get' has not been run – 0 hosts selected
+2025-11-27 14:34:29,743 -  nornir.core -  WARNING -        run() - Task 'napalm_get' has not been run – 0 hosts selected
+2025-11-27 14:35:36,177 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_facts']} on 1 hosts
+2025-11-27 14:35:36,181 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces_ip']} on 1 hosts
+2025-11-27 14:35:36,182 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 14:35:58,683 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 14:40:22,059 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_facts']} on 1 hosts
+2025-11-27 14:40:22,065 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces_ip']} on 1 hosts
+2025-11-27 14:40:22,069 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 14:40:30,793 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 14:40:30,804 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_facts']} on 1 hosts
+2025-11-27 14:40:30,817 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces_ip']} on 1 hosts
+2025-11-27 14:40:36,971 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_config']} on 1 hosts
+2025-11-27 14:40:43,753 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces_ip']} on 1 hosts
+2025-11-27 14:40:43,762 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_facts']} on 1 hosts
+2025-11-27 14:40:43,767 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 14:43:35,049 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces']} on 1 hosts
+2025-11-27 14:43:35,051 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_interfaces_ip']} on 1 hosts
+2025-11-27 14:43:35,053 -  nornir.core -     INFO -        run() - Running task 'napalm_get' with args {'getters': ['get_facts']} on 1 hosts
+2025-11-27 14:43:45,140 - nornir.core.task -    ERROR -      start() - Host 'R1-CPE-BAT-A': task 'napalm_get' failed with traceback:
+Traceback (most recent call last):
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/nornir/core/task.py", line 98, in start
+    r = self.task(self, **self.params)
+        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/nornir_napalm/plugins/tasks/napalm_get.py", line 44, in napalm_get
+    result[g] = method(**options)
+                ^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/napalm/ios/ios.py", line 1215, in get_interfaces
+    output = self._send_command(command)
+             ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/napalm/ios/ios.py", line 208, in _send_command
+    output = self.device.send_command(command)
+             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 111, in wrapper_decorator
+    return_val = func(self, *args, **kwargs)
+                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/utilities.py", line 667, in wrapper_decorator
+    return func(self, *args, **kwargs)
+           ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 1791, in send_command
+    new_data = self.command_echo_read(cmd=cmd, read_timeout=10)
+               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 1494, in command_echo_read
+    new_data = self.read_until_pattern(
+               ^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 755, in read_until_pattern
+    raise ReadTimeout(msg)
+netmiko.exceptions.ReadTimeout: 
+
+Pattern not detected: 'show\\ interfaces' in output.
+
+Things you might try to fix this:
+1. Adjust the regex pattern to better identify the terminating string. Note, in
+many situations the pattern is automatically based on the network device's prompt.
+2. Increase the read_timeout to a larger value.
+
+You can also look at the Netmiko session_log or debug log for more information.
+
+
+
+2025-11-27 14:43:45,145 - nornir.core.task -    ERROR -      start() - Host 'R1-CPE-BAT-A': task 'napalm_get' failed with traceback:
+Traceback (most recent call last):
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/nornir/core/task.py", line 98, in start
+    r = self.task(self, **self.params)
+        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/nornir_napalm/plugins/tasks/napalm_get.py", line 44, in napalm_get
+    result[g] = method(**options)
+                ^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/napalm/ios/ios.py", line 1316, in get_interfaces_ip
+    show_ip_interface = self._send_command(command)
+                        ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/napalm/ios/ios.py", line 208, in _send_command
+    output = self.device.send_command(command)
+             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 111, in wrapper_decorator
+    return_val = func(self, *args, **kwargs)
+                 ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/utilities.py", line 667, in wrapper_decorator
+    return func(self, *args, **kwargs)
+           ^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 1791, in send_command
+    new_data = self.command_echo_read(cmd=cmd, read_timeout=10)
+               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 1494, in command_echo_read
+    new_data = self.read_until_pattern(
+               ^^^^^^^^^^^^^^^^^^^^^^^^
+  File "/home/cpe/.local/share/virtualenvs/fastprod_backend-xSm6n0LL/lib/python3.12/site-packages/netmiko/base_connection.py", line 755, in read_until_pattern
+    raise ReadTimeout(msg)
+netmiko.exceptions.ReadTimeout: 
+
+Pattern not detected: 'show\\ ip\\ interface' in output.
+
+Things you might try to fix this:
+1. Adjust the regex pattern to better identify the terminating string. Note, in
+many situations the pattern is automatically based on the network device's prompt.
+2. Increase the read_timeout to a larger value.
+
+You can also look at the Netmiko session_log or debug log for more information.
+
+
+

fastprod_backend/start.sh

@@ -0,0 +1,3 @@
+#!/bin/bash
+export FLASK_APP=fastprod/api.py
+pipenv run flask run --host=0.0.0.0 --port=5000